A well-functioning washing machine is important for eliminating dirt, sweat, and stains from your clothes. But how effective the cleaning is depending on the functions; performance & the settings you choose in the washing machine. Do you open the lid of the washing machine after a cycle and find your clothes submerged in water? It indicates that there is an issue. The drum may not drain! But why does it happen?
Many washing machine users encounter water drainage problems with their washing machines at some point in their life. The first step is to consult your washing machine’s owner’s manual. The troubleshooting section can provide insights into potential drainage issues. Modern washing machines often display error codes, which can help identify the problem. If the issue persists, run the washing machine through its drain cycles and consider the following possible causes:
- Clogs in the rubber drain tube leading from the washing machine to the standpipe.
- Obstructions in the water pump, filters, or impellers.
- A broken drive belt.
- Mechanical failure of the water pump.
- A completely clogged drain system.
You need to call a washing machine draining service in Sydney that can resolve the issues. But before you call in a professional for help, you should follow certain troubleshooting tips to get to the bottom of it! Let’s find out what you can do to avoid such a situation.
Perform a Master Reset
Remove the plug from your washer for about one minute. Then, plug the appliance back in. Open and close the door 5-six times in 12 seconds to tell the computer to reset everything. This is a simple fix if your machine supports this method, but it may not be suitable for all models.
Test the Lid Switch Assembly:
Top-loading washers will only drain and spin if the lid is properly closed. A faulty lid switch assembly might be the reason for the drainage issue. See if the machine responds when you lower the lid switch. If it activates the drum to drain, you may need to extend the stem on the lid so it depresses the switch. Does pressing the lid switch doesn’t trigger any response? It might need to be replaced right away.
Check for Kinks in the Drain Hose:
Check to ensure the hose behind the washer is flattened out. It allows water to flow freely. A kinked hose can prevent the otherwise functional machine from draining.
Inspect the Drain Hose or Pump for Clogs:
Small items like coins, and socks often get stuck in the washing machine draining system. It might be a reason for clogs. Remove the front panel of the washer and check what causes the obstructions in the hose or pump. Remove them if you find anything in the washing machine draining system. Be careful, as water may pour out when you disconnect the hose! So try to scoop out as much water from the drum as possible. Doing it beforehand can make things easy.
Clean the Coin Trap:
Some washers have a coin trap. Check it to see if it catches some foreign objects before they reach the drain. These traps usually have an accessible panel. If your washer has one, clean it out. See if the tub drains properly. If not then contact our expert washing machine draining service right away!
Check the Water Level Control:
What happens if your washer won’t drain or spin? It may happen as the water level control system might be malfunctioning. Open the control panel and look for a plastic tube connected to the water level valve. If it’s clogged then try to clear it with vinegar. If the valve is corroded, it may need to be replaced. Schedule a washing machine draining service in Sydney to bring back its original condition.
If the above troubleshooting tips won’t work or resolve the problem, you could have a broken water pump or there is an issue in the drive belt. Such components require specialised repair or replacement service. We are one of the leading washing machines draining service in Sydney and we can resolve all such issues in no time. We ensure your machine will work again smoothly.
Repairing a washing machine is often best if handled by service professionals. If your washing machine still won’t drain, it’s time to call A1 Appliance Repair for help. We are happy to offer proficient appliance service including washing machine draining service for private and commercial customers in Sydney. No task is too big or too complex or too small for us. Our skilled washing machine draining service technicians can swiftly and efficiently get your washing machine back to its optimal performance condition.
